This series of ink to high-quality polyamide resin-based material, the use of advanced production technology made. Excellent gloss resistance, cold resistance, water resistance, good adhesion and excellent printability, applicable to all types of plastic surfaces printing.
[For substrate]
● surface-treated polyethylene (PE), polypropylene (PP) film (the degree of processing were more than 38 dyne).
● cellophane (PT).
● paper, aluminum foil, polyvinyl chloride.
● polyester film PET.
【Product Features】
● for plastic packaging printing surface high gloss, high density requirements.
● flexibility, good adhesion, resistance to rubbing.
● good abrasion resistance, scratch-resistance, cold resistance, water resistance.
● excellent anti-adhesion, excellent print performance and stability.
Technical index
● Viscosity: 10 "to 35" (# 3 Zahn cup) Temperature: 25 ℃
● fineness: color <5 microns, white <10 microns, metallic <30 microns
● First Dry: 20 ~ 50mm / 25 ℃ • 30 Miao
● Adhesion: ≥95%
● Shelf life: Ink dark storage at room temperature, shelf life of 12 months, gold, silver ink is 3 months;
Printing speed and version [deep]
● 20 ~ 100m / min, applicable to different gravure etch depth, from 10 to 50 microns can be.
[Diluent]
Category / Title
Toluene
Xylene
Isopropanol
Ethyl
Butyl
Quick-drying
60
-
25
15
-
Dry
60
-
30
10
-
Slow dry
45
20
25
-
10
[Standard color]
● 1000 varnish, 1020 white, yellow 2020 original, 3010 original red, blue 4040 original, 5030 black.
【Precautions】
● Before printing needs to assess the quality of the substrate, the film must be surface treated, the surface tension of 38 dyne required to achieve the above, in order to ensure good adhesion.
● solvent evaporation rate and solvency to ensure the quality of the printing of the finished product is very important, improper use can damage the film-forming properties of the ink, such as gloss, color, etc., and may cause damage to the blade and copperplate.
● printing places temperature, humidity is not too high, the finished print to fully dry, to prevent anti-stick.
● This series of ink can not be used for a large number of oils, plasticizers or spice bags.
● The ink series does not have a sealing and composite properties.
Note: This information is based on the Company's internal production and experimental results and conclusions, users should be fully understood before using it meets their specific requirements, and the full test on the printed material to ensure proper use of the product, due to the users can not anticipate or control the conditions of use, no article data as the basis for quality assurance, but also the results of post-processing and post-application generated by not jointly and severally liable.