【product description】
● has a high gloss, good fullness and good hardness and advanced coatings for aluminum power vacuum surface has excellent adhesion.
The scope of application
● plastic substrate aluminum power vacuum
Resin Type []
● special modified thermoplastic acrylic resin
[Materials] Compliance
● meet the ASTM F963-08, EN71 Part 3: 1994, Japan Part 3: 2002's 1.5,16 CFR 1303, CHPA CH-3 Schedule I Part I Item 9, GB 6675-2007 Safety Standards for heavy metals such as organic and inorganic toner
[Solvent]
● butyl acetate / isopropanol / ethylene glycol monomethyl ether / ethylene glycol ether acetate
【specification】
● Viscosity: 75 ± 2KU / 30 ° C (ASTM D4287)
● Specific gravity: 0.92-1.20 depending on color (ASTM D1475)
● Solid content: 30-50% depending on color
● Gloss: (BS 3900 D5 60)> 85%
● Adhesion: 0-1 (100% squares method)
● hardness: HB-H (ASTM D3363) (Mitsubishi Pencil)
Construction [Conditions]
● Surface treatment: degreasing, cleaning, drying
● supporting thinner: T-410
● Dilution ratio: 1︰0.5-1.5 (oil: water) volume ratio (depending on the specific customer needs)
● Film thickness: 15-25um (wet film gauge)

Dry conditions []
● To touch: 30 minutes / 30 ℃
● Real dry: about 24 hours / 30 ℃
● baking (50 ~ 75 ℃): less than 30 minutes, depending on the specific customer needs
【Storage conditions】
● year / 25 ℃ cool dry place
[Note]
● The above information is based on current knowledge and the Division is provided in good faith, are for reference only without any assurance purposes. Be sure to use the full client before detection and other properties of the applicability of our products. Information is subject to change without inform.