【product description】
● has a high gloss, good hardness, acid and advanced color impermeable coating, construction methods can be hand painted.
The scope of application
● POLY substrate (unsaturated polyester).
Resin Type []
● The thermoplastic acrylic resin
[Materials] Compliance
● meet the ASTM F963-08, EN71 Part 3: 1994, Japan Part 3: 2002's 1.5,16 CFR 1303, CHPA CH-3 Schedule I Part I Item 9, GB 6675-2007 Safety Standards for heavy metals such as organic and inorganic toner
[Solvent]
● xylene / isobutanol / butyl acetate / ethylene glycol monomethyl ether / cyclohexanone / acetone / glycol ether acetate / MEK / ethyl acetate
【specification】
● Viscosity: 85 ± 2KU / 30 ° C (ASTM D4287)
● gravity: 0.93-1.20g / ml depending on color (ASTM D1475)
● Solid content: 30-50% depending on color
● Gloss: (BS 3900 D5 60)> 80% and a full half-dumb and dumb choice
● Adhesion: 0-1 (100% squares method)
● hardness: HB-H (ASTM D3363) (Mitsubishi Pencil)
Construction [Conditions]
● Surface treatment: degreasing, cleaning, drying
● supporting thinner: T-580
● Dilution ratio: 1︰0.5-2 (oil: water) volume ratio (depending on the specific needs of customers spraying)
● Film thickness: 15-30um (wet film gauge)
Dry conditions []
● To touch: 30 minutes / 30 ℃
● Real dry: about 24 hours / 30 ℃
● baking (50 ~ 75 ℃): less than 30 minutes, depending on the specific customer needs
【Storage conditions】
● year / 25 ℃ cool dry place
[Note]
● The above information is based on current knowledge and the Division is provided in good faith, are for reference only without any assurance purposes. Be sure to use the full client before detection and other properties of the applicability of our products. Information is subject to change without inform.