【product description】
● has excellent gloss, general metal and bakelite has excellent adhesion, suitable for automotive, toys and lighting industries.
The scope of application
● general metal, zinc alloy, bakelite
Resin Type []
● thermosetting acrylic, amino resin, epoxy resin
[Materials] Compliance
● meet the ASTM F963-08, EN71 Part 3: 1994, Japan Part 3: 2002's 1.5,16 CFR 1303, CHPA CH-3 Schedule I Part I Item 9, GB 6675-2007 Safety Standards for heavy metals such as organic and inorganic toner
[Solvent]
● xylene / isobutanol
【specification】
● Viscosity: 75 ± 2KU / 30 ° C (ASTM D4287)
● Specific gravity: 0.95-1.25 depending on color (ASTM D1475)
● Solid content: 50-65% depending on color
● Gloss: (BS 3900 D5 60)> 80%
● Impact: (BS 3900 E1) is red 50KG * CM recoil 50KG * CM
● Adhesion: 0-1 (100% squares method)
● Flexibility: (BS 3900 E1) 2mm
● Hardness: ≥H (ASTM D3363) (Mitsubishi Pencil) (depending on color)
Construction [Conditions]
● Surface treatment: phosphate or rust, oil, clean and dry
● supporting thinner :( hand spray) T-700 series (electrostatic discharge) T-704 series
● dilution ratio :( hand spray) 1︰0.5-1.2 (oil: water) volume ratio (electrostatic discharge) 9-13 sec / NK-2 cups (depending on the specific customer needs)
● Film thickness: 20-30um (wet film gauge)
Dry conditions []
● 140 ± 5 ℃ / 30mins
【Storage conditions】
● six months / 25 ℃ cool dry place
[Note]
● The above information is based on current knowledge and the Division is provided in good faith, are for reference only without any assurance purposes. Be sure to use the full client before detection and other properties of the applicability of our products. Information is subject to change without inform.