【product description】
● printing inks used in hard plastic substrates, with high gloss, high solids and fullness, excellent workability, hiding power and good leveling, both acid and impermeability color performance.
The scope of application
● general ABS, PS, HIPS and PS paint surface.
Resin Type []
● thermoplastic acrylic resin, poly-resin special
[Materials] Compliance
● meet the ASTM F963-08, EN71 Part 3: 1994, Japan Part 3: 2002's 1.5,16 CFR 1303, CHPA CH-3 Schedule I Part I Item 9, GB 6675-2007 Safety Standards for heavy metals such as organic and inorganic toner
[Solvent]
● diacetone alcohol / glycol ether acetate / ethylene glycol butyl ether
【specification】
● Viscosity: 120 ± 2KU / 30 ° C (ASTM D4287)
● Specific gravity: 0.95-1.25 depending on color
● Solid content: 35-55% depending on color
● Gloss: (BS 3900 D5 60)> 75%
● Adhesion: 0-1 (100% squares method)
Construction [Conditions]
● Surface treatment: degreasing, cleaning, drying
● supporting thinner: T-350
● Dilution: Depending on the specific needs of construction customers
Dry conditions []
● To touch: 30 minutes / 30 ℃
● Real dry: about 24 hours / 30 ℃
● baking (50 ~ 75 ℃): less than 30 minutes, depending on the specific customer needs
【Storage conditions】
● year / 25 ℃ cool dry place
[Note]
● The above information is based on current knowledge and the Division is provided in good faith, are for reference only without any assurance purposes. Be sure to use the full client before detection and other properties of the applicability of our products. Information is subject to change without inform.