【product description】
● senior plastic electronic products applicable decorative coatings, with excellent hardness, adhesion and chemical resistance.
The scope of application
● ABS, PS, HIPS and PC, and other plastic substrates.
Resin Type []
● thermoplastic acrylic resin.
[Materials] Compliance
● meet the ASTM F963-08, EN71 Part 3: 1994, Japan Part 3: 2002's 1.5,16 CFR 1303, CHPA CH-3 Schedule I Part I Item 9, GB 6675-2007 Safety Standards for heavy metals such as organic and inorganic toner
[Solvent]
● acetone / methyl ethyl ketone / methyl isobutyl ketone / ester
【specification】
● Viscosity: 75 ± 5KU / 30 ° C (ASTM D4287)
● gravity: 0.92-1.2 depending on color (ASTM D1475)
● Solid content: 35-50% depending on color
● Adhesion: 0 (100% squares method)
● hardness: HB-H (ASTM D3363) (Mitsubishi Pencil)
● Alkali resistance: (within 4% NaHCO3 25 ℃ 24 hours of normal)
● 24 hours after alcohol-resistant construction :( film) after ethanol was dropped on a cotton ball, plus 0.5KG rub back and forth 50 times the weight of the surface to be no obvious signs of damage.
Construction [Conditions]
● Surface treatment: degreasing, cleaning, drying
● supporting thinner: T-805 series
● Dilution ratio: oil: Open water = 1/2 to 3 / 8-10 seconds -NK-2 cups (depending on the specific needs of customers spraying)
● Film thickness: 8-15um (dry basis)
Dry conditions []
● To touch: 30 minutes / 30 ℃
● Real dry: about 24 hours / 30 ℃
● baking (50 ~ 75 ℃): less than 30 minutes, depending on the specific customer needs
【Storage conditions】
● year / 25 ℃ cool dry place
[Note]
● The above information is based on current knowledge and the Division is provided in good faith, are for reference only without any assurance purposes. Be sure to use the full client before detection and other properties of the applicability of our products. Information is subject to change without inform.