【product description】
● In the case of single-component and an acrylic resin as the main specialty from the dry coating, with good electrical conductivity, and electromagnetic waves have high performance absorption.
The scope of application
● General HIPS and ABS hard plastic, metal can
Resin Type []
● specialty thermoplastic acrylic resin
[Materials] Compliance
● meet the ASTM F963-08, EN71 Part 3: 1994, Japan Part 3: 2002's 1.5,16 CFR 1303, CHPA CH-3 Schedule I Part I Item 9, GB 6675-2007 Safety Standards for heavy metals such as organic and inorganic toner
[Solvent]
● acetone / methyl ethyl ketone / methyl isobutyl ketone / butyl acetate / ethylene glycol monomethyl ether
【specification】
● semi-matte surface for selection
● a stable conductivity by temperature and moisture resistance test (-20 ℃ -70 ℃ RH95%)
● precipitate soft, easy stirring
● vertical plane painting and have good adaptability
● When the wrong grease Yi Tu
● methanol-free
Construction [Conditions]
● film thickness: 25 ~ 50UM (wet film meter, depending on the actual requirements)
● electrical conductivity: 0.5 ~ 2.0Ω / cm (D.F.T.50UM)
● construction methods: general spraying (preferably with pneumatic stirring means)
● Dilution ratio: 1:0.5-1.0 (oil: water) (depending on the specific needs of customers spraying) (volume ratio)
● Surface treatment: degreasing, clean, dry
Dry conditions []
● To touch: 30 minutes / 30 ℃
● Real dry: about 24 hours / 30 ℃
● baking (50 ~ 75 ℃): less than 30 minutes, depending on the specific customer needs
【Storage conditions】
● year / 25 ℃ cool dry place
[Note]
● The above information is based on current knowledge and the Division is provided in good faith, are for reference only without any assurance purposes. Be sure to use the full client before detection and other properties of the applicability of our products. Information is subject to change without inform